HeatingSave BEMS (Building Energy Management System) Controller


Sale!
T3520z-5

Original price was: £915.00.Current price is: £741.76.

At the heart of HeatingSave is a four layer, a state-of-the-art, surface mount microprocessor controller with 8 temperature/light level/humidity analogue sensor inputs, 8 occupancy sensor/switch digital inputs and 8 mains relay outputs.

In stock

Product Code: T3520

Category:

Product Description

At the heart of HeatingSave is a four layer, a state-of-the-art, surface mount microprocessor controller with 8 temperature/light level/humidity analogue sensor inputs, 8 occupancy sensor/switch digital inputs and 8 mains relay outputs.

Each relay can switch the mains (10 amps max.) or distribute mains (6 amps max.). An additional contactor unit can switch up to 30 amps. Each controller can have up to 16 sub-controllers, each adding 8 analogue and 8 digital inputs and 8 relay outputs.

KEY FEATURES

  • 8 x Analogue Inputs
  • 8 x Digital Inputs
  • 2 x 0-10v DAC Outputs
  • 8 x Mains relay outputs NOTE: This can be extended using sub-unit (T3516) to a maximum of 64 Analog inputs, 64 digital inputs, 2 0-10V DAC outputs and 64 Relay Outputs. With the use of Zig 2.4 Mhz wireless mesh network Technologies, the number of inputs and outputs can be expanded to a number of device close to 65,000. However a number of 100 device has been our test limit.
  • Battery Backup in the event of mains failure
  • Local user interface materialised by a Keypad which allow users to have direct control on their heating zones and override the system if needs be
  • Override switch for main part of the system also provided

FUNCTIONALITY

  • The T3520 needs to be connected to a local network to communicate with a T3521-H so that user setup can take place and that data can be backup up on an SD card.
  • If the T3520 and the T3521-H are connected to the internet, the data will also be saved on a secured server so that user can access multiple controller remotely using our dashboard.
  • The RS485 using Heatingsave private protocol is used to control and to retrieve inputs of sub-units. The maximum number of subunits is 8.
  • Analog inputs are mainly used for temperature sensor and light sensor.
  • Digital inputs are used for PIR, switch and metering Zig 2.4 Mhz wireless mesh network inputs and outputs regroup different type of sensor from temperature, humidity and CO2 but also digital input such as metering, switch and PIR.
  • The Keypad allow the user to directly control zone and changes behaviour of the software.
  • The keypad can also be used to override current settings to do maintenance on the system.

 

 

Specifications

Weight 5.02 kg
Dimensions 297 × 397 mm
Current Limit

5A

On Board Battery (when unpowered) Up

Up to 3 years

Input Power Supply

230V, 50/60 Hz

Readings

-400C to 1400C

Temperature Sensor Accuracy

+/- 0.50C

Temperature Sensor Cable length

Up to 100m

PIR Detection

Up to 6m

PIR Cable length

Up to 25m

Switch Input Cable Length

Up to 100m

DAC output Voltage

Voltage 0-10V

DAC output Step

100mV

Relay Output Voltage

230V

Battery Backup Duration

Up to 2hrs

RS485 Baud Rate Supported

9600, 19200, 38400,57600,115200

Ethernet Protocol

TCP/ UDP /IP

Number of Zig 2.4 Mhz wireless mesh network devices supported

100

Range

Up to 30 meters

Download product brochure

    Make an enquiry for this product

      Please read our Privacy Policy before submitting your enquiry.

       

      I acknowledge and agree to the Privacy Policy, available here.

       

       


      Leave a Reply

      Your email address will not be published. Required fields are marked *